Hycon Hydraulic Power Packs
Hycon HPP09 Power Pack
HYCON HPP09 is the most sold powerpack. It is used especially for rental, contractors, municipalities, supply companies (power-water-gas-heat-sewage-telecom) etc.
who mostly use 20 l.p.m. tools like breakers, core drills, saws, submersible pumps etc.
It is very compact with small dimensions and low weight. Therefore it can be transported in any car, van etc.
The investment in this powerpack and a breaker is usually less than half the price of a 4m³ compressor and breaker, and the performance is the same. Integrated oil alert on engine oil level. HPP09 comes standard with the HYCON POR system (Power on Request) = automatic regulation of power.
| Technical Data | |
| Oil flow, l.p.m. | 1x20 |
| Max. pressure, bar | 150 |
| Engine | Honda 9 HP petrol |
| Flow | POR (automatic) |
| Starter | Recoil |
| Weight, kg | 68 |
| Noise level 1 m LPA dB | 88 |
HPP13 FLEX Power Pack
HYCON HPP13 FLEX is the bestseller in our FLEXLINE-series of powerpacks. It is used mainly for contractors, rental, municipalities,supply companies etc. With its infinitely variable flow adjustment from 0 to 30 l.p.m., the HPP13 FLEX can be
used for many tools.
The perfect power source for high performance tools like breakers, cut-off saws, core drills, submersible pumps, ring saws and diamond chain saws.
HPP13 FLEX is very compact, has low weight, and is easy to transport in any vehicle. Integrated oil alert on engine oil level.
| Technical Data | |
| Oil flow, l.p.m. | 1x20-30 |
| Max. pressure, bar | 150 |
| Engine | Honda 13 HP petrol |
| Flow | Adjustable |
| Starter | Recoil |
| Weight, kg | 81 |
| Noise level 1 m LPA dB | 89 |
| Noise level LWAdB | 101 |
Hycon Hydraulic Breakers
HYCON HH20 is a compact all-round breaker. Despite low weight it handles even the toughest jobs. It is designed for breaking concrete, asphalt, frozen ground, brick wall etc. It comes standard with the HYCON PROLINE vibration-reduced handle, which brings high operator comfort.
HH20 is preferred by contractors, municipalitiies, utilities, armies, railroads, etc. and is perfect for rental. The breaker can be connected to the HYCON powerpacks and other hydraulic power sources.
| Technical Data | |
Weight, kg | 22 |
Oil flow, l.p.m. | 20 |
Working pressure, bar | 110 |
Max. pressure, bar | 160 |
Blow frequency, 1/min. | 1560 |
Noise level 1 m LPAdB | 94 |
Noise level LWAdB | 106 |
Vibration level (3 axis) m/s² | 6.8 |
| Tool size, mm hex | 25x108 |
HYCON HH27 is exceptionally strong coping with all jobs requiring extreme power (75% higher performance than HH20). Best power to weight ratio.
It is designed for breaking hard concrete, asphalt, ramming jobs etc. HH27 comes standard with the HYCON PROLINE vibration-reduced handle.It is especially used by contractors, armies, rail roads etc. Standard tool size is hex 32x160 mm.
The breaker can be connected to the HYCON powerpacks and other hydraulic power sources. It is available both as 20 and 30 l.p.m. models.
| Technical Data | |
Weight, kg | 27.4 |
Oil flow, l.p.m. | 20/30 |
Working pressure, bar | 130 |
Max. pressure, bar | 160 |
Blow frequency, 1/min. | 1260 |
Noise level 1 m LPAdB | 98 |
Noise level LWAdB | 110 |
Vibration level (3 axis) m/s² | 10.7 |
| Tool size, mm hex | 32x160 |
Hydraulic Core Drills
The HCD25-100 has 1500 rpm and is suited for a drilling range up to 100 mm and is therefore often used for house installations.
It is extremely easy to hold and will drill through any material . No need for a drill rig. By that you save a lot of cost.
The core drill offers top safety with the built-in ASCO System (Automatic Safety Cut off). The tool automatically cuts off if the core bit jams - no injury to the operator.
